Assembly

Piedmont Aviation Component Services is looking for qualified Aircraft Landing Gear Technician. These Technicians will perform the following duties:

• Responsible for the disassembly, cleaning, analytical inspection, repair schemes, assembly, testing, painting, sub-work orders and travelers related to LRUs, components, parts and tools.
• Responsible for maintaining equipment related to area.
• Read and comply with work instructions.
• Write technical and accurate reports as needed.
• Work independently of others as well as teams.
• Accurately complete work orders, BOMs, data inputs within ERP system.
• Read and understand Commercial, FAA, EASA, Repair Station, and ISO documentations.
• Process proper tools.
• Understand and practice safe and efficient productive use of tools.
• Mentor and train other personnel.
• Immediately report to any supervisor any safety, quality...

We are Data Spectrum, (a subsidiary of Motivo Engineering) a product development firm proud of its innovative and reliable engineering solutions. We are an engineering resource, supporting our clients’ product development. We are looking to hire an Assembly Technician to join our small, tightly-knit engineering team.

Base Rate Range: $20/hr - $30/hr

Annual Profit Sharing Estimate: $4,160 - $6,240

Salary is dependent on experience, knowledge and interview performance.

Responsibilities

• Supervise and motivate the electrical assembly team in power supply for various legacy projects, ground testing equipment, PCB, cabling, and wire harness designs to specification and blueprints.
• Support in inspection and testing of assembled products for quality and functionality.
• Support in troubleshooting assembly.
• Develop schedules and assign project responsibilities to ensure on-time delivery.
• Submission...

The Manufacturing Technician performs the production assembly and test of the company’s component, sub-assembly and finished goods parts. The Manufacturing Technician uses company drawings, assembly instructions and Shop Orders to complete and document the required work.

Duties and Responsibilities:

• Obtain the assembly kits from the stock room personnel
• Verify the physical contents of the assembly kit to the Pick List paperwork provided with the Shop Order
• Advise the stock room personnel of any discrepancies found and requests corrections to the issued materials
• Assemble items in accordance with company drawings and assembly instructions, following the steps (in order) as outlined in the provided Shop Order routing. The Manufacturing Technician indicates completion of each routing step by initialing before starting the subsequent assembly step
• Request in-process inspection where required...

Hours: 8am-4pm

Pay: $23/hr+

• Participate in a production line, ensuring material, personnel, and documentation are all aligned to guarantee proper assembly, testing and shipment of systems.
• Validation of equipment and materials to ensure conformity of product
• Ensuring all production documentation is followed, maintained, and updated as needed.
• Experience with production / assembly of electronics and electronic components.
• Ability to perform cable dressing inside of racks or enclosures.
• Ensuring the equipment systems are built, connected and tested to drawings and current production standards, which may meet or exceed industry standards.
• Assist in the quality testing of equipment prior to dispatch to the field.
• Ability to follow detailed instructions.
• Ability to follow instructions / checklists in a digital format

• Setting up and troubleshooting all standard printed circuit board assembly processes.
• Working knowledge of ISO 9001 AS9100 practices and IPC-610-A Workmanship Standards required.
• Support the production schedule to meet customer satisfaction and company revenue goals.
• Constantly monitor processes and operations and draw from training and experience to identify opportunities for improvement.
• Support generation and reporting of process metrics.
• Ability to multi-task with a strong sense of urgency.
• Ability to meet deadlines and to work with a minimum of oversight and direction.
• Analyzing Information, Reporting Research Results and Documentation Skills

Requirements

• Strong Process Development skills and experience are required.
• Experience with setting up and troubleshooting all standard printed circuit board assembly processes.
• Experience with screen-printer...

Are you an experienced Production Assembler looking for an exciting opportunity to join a friendly and innovative team? Look no further - Luxium Solutions, LLC is seeking a talented Production Assembler to join our team and contribute to our success.

At Luxium Solutions, we pride ourselves on creating top-quality products that meet the highest standards. As a Production Assembler, you will be responsible for assembling and testing various electronic and mechanical components to produce finished products. Your keen attention to detail and precision will ensure that our products are of the utmost quality.

We value teamwork and a positive work environment, and our friendly team is always ready to lend a helping hand. With a focus on innovation and continuous improvement, Luxium Solutions is the perfect place for someone like you who is passionate about manufacturing.

Requirements

• High school diploma or equivalent.
• Previous...

Who we are:

Fuse delivers innovative communications, networking, and computing solutions for U.S. defense agencies and our nation’s warfighters. Our game-changing products and solutions ensure secure, reliable information and communications at the tactical edge.

About this role:

Do you thrive in innovative, design-driven environments with a high level of both accountability and trust? Are you passionate about delivering elegant hardware and software solutions designed with the operator in mind and the right amount of engineering rigor? If so – we want to hear from you! This role will support the agile development of innovative communications, networking, and computing solutions for U.S. defense agencies that improve the sharing of information among warfighters distributed throughout airborne, maritime, and ground environments.

What you’ll do:

Fuse is looking for an electrical Assembly...

The Production Operator is an Operations team member who specializes in manufacturing of implantable product to precise manufacturing processes with direct supervision.

KEY DUTIES AND RESPONSIBILITIES

• Works with the operations and quality organization with direct supervision in the production of human use product.
• Performs assembly of product using small piece parts and equipment such as microscopes, small tools, ovens, cleaning equipment and fixturing with well defined documentation in the controlled environmental area.
• Maintains a clean and well organized work area in production.
• Follows standard operating instructions, work instructions and manufacturing processes in compliance with company and regulatory guidelines.
• Completes detailed production traceability documentation. Understands and utilizes QAD for this activity as required.
• Performs inventory management activities in production as...

Purpose of the Position

The position assembles/ fabricates any or all of the following: semiconductor material, electronic components, subassemblies, products or systems by performing work assignments that are routine in nature where judgment is required. Although the location of the position is in Jessup, MD, from time to time it may be required to undertake duties at other Thorlabs locations. 

Essential Job Functions include the following, but are not limited to:

• Reads work orders, follows production drawings and sample assemblies.
• Positions and aligns parts in specified relationship to each other.
• Assembles components and devices from multiple elements including semiconductor devices, ceramic submounts, optical elements (lenses, isolators, …), electrical elements (resistors, capacitors, thermistors, thermoelectric coolers, …), etc.
...

Partially or completely assembles electromechanical products such as handling devices, robotics, and mechanical assemblies to meet drawing specifications with supervision. This position will also assist with loading and unloading large crates of product. This role would primary be based at our Manchester NH facility and requiring occasional travel to our Nashua NH facility.

Essential Functions & Responsibilities

• Utilizes basic assembly techniques to assemble components correctly.
• Uses hand tools, powered drivers, torque wrenches, and other basic hand tools.
• Fastens parts together with bolts, screws, speed clips, rivets, or other fasteners as required by drawing specifications.
• Ability to recognize potential quality deficiencies in assemblies and notifies department lead of such concerns.
• Assisting the plant with shipping and receiving activities.
• Demonstrates responsibility and accountability for creating...

This position works among a team of individuals assembling products for our customers with the occasional guidance of experienced team members. The role entails such functions as assembly, soldering and testing. Although the location of the position is in Newton, NJ, from time to time it may be required to undertake duties at other Thorlabs locations. 

Essential Job Functions include the following, but are not limited to:

• Must be able to understand written work instructions and drawings for a wide range of products to properly assemble and test the final product to the highest of quality standards and with zero scrap or rework.
• Assemble components and products of varying size and complexity that includes cleaning, inspecting, and testing of components and assemblies.
• Meets the expected assembly timelines that are outlined on the production orders
• Remain focused...

Ready to start your career? At Snap-Tite Hose, we are a leading manufacturer of firefighting, agricultural, and industrial hose. Our commitment to engineering and manufacturing industry-leading quality hose has earned us a trusted reputation worldwide. As a General Laborer in our Finishing Department, you will work alongside our experienced team to assist in the final assembly of our premium hose products.

Don't worry if you don't have any prior experience - we provide on-the-job training to equip you with the necessary skills. This is an entry-level position with a starting wage of $15.50 per hour, with the added bonus of a $2.00/hour shift differential for 2nd/3rd shifts.

Requirements

We are looking for individuals who are:

• Capable of using gauges and tools, and easily navigate through specs and charts
• Able to operate machinery with precision and follow instructions diligently
• Physically fit and capable of lifting...

The primary responsibilities of the 1st shift Building Assembly Supervisor is to plan, direct, coordinate, and control activities of workers engaged in both the finishing and staging departments.

• Interfaces with managers, and supervisors from other departments coordinating supporting needs and output activities from those departments.
• Assists with prioritizing workloads and the coordination of manpower requirements by increasing or decreasing personnel and overtime to meet changing conditions to ensure customer order deadlines are met.
• Studies production schedules for proper shop floor production layout and ensures materials needed are accessible to assigned builder crews. 
• Assists with training and executing process improvements as recommended through the quality management system.
• Supports and trains on suggested changes in working conditions and use of equipment to increase efficiency of shop, department, or work...

Piedmont Aviation Component Services is looking for a qualified APU Assembly Technician. APU (Auxiliary Power Unit) is a turbine engine utilized on the aircraft to provide electrical and pneumatic power during periods when the main engines are not running. The following is a list of job duties that an APU Assembly Technician will perform:

• Responsible for the assembly, testing, and travelers related to LRUs, components, parts and tools.
• Secondary responsibilities consist of disassembly, cleaning, analytical inspection, rework schemes, painting, packaging, and other duties as assigned.
• Read and interprets maintenance manuals, or other technical data to determine the feasibility and method to perform the assigned task.
• Replaces or repairs damaged or worn engine parts and component parts using general hand tools, special tools, pneumatic tools and precision measuring equipment. Assembles components with same tools...

Nuclera is a venture-backed, founder-driven biotech company headquartered in Cambridge, UK with significant operations in Boston, USA. The company’s mission is to make biology accessible to everyone through desktop bioprinting. We are beginning this mission by making proteins accessible through the launch and on-going development of our eProtein desktop bioprinting platform. eProtein promises to be a breakthrough protein printing technology that brings rapid prototyping to the life science benchtop and accelerates the drug discovery process. Nuclera is entering the next phase of its growth with plans to dramatically expand its staff over the next 12-24 months offering extensive learning and career progression opportunities.

This opportunity is for a General Technician to operate under the supervision of the Senior Manager. The successful candidate will be responsible for keeping out lab equipment maintained and calibrated to be ready for production and upcoming research...

TRL11 is a venture backed startup looking to bring cutting edge video technology to the space economy. We are based in Irvine, CA. This candidate will be working on-site.

Position Overview:

We are seeking to hire an experienced Electronics Technician to join our team. As a member of our engineering team, you will be responsible for assisting other engineers build prototypes and final products. This person will be involved in the assembly, testing, and maintenance of electronic systems and components essential for space exploration missions. This position offers the opportunity to work at the forefront of space technology. If you are passionate about cutting-edge technology, this is an excellent opportunity for you to participate in the new space economy.

Requirements

• Experience with assembling, testing, and maintainance of electronic systems and components. 

• Experience with debugging...

The Manufacturing Technician performs the production assembly and test of the company’s component, sub-assembly and finished goods parts. The Manufacturing Technician uses company drawings, assembly instructions and Shop Orders to complete and document the required work.

Duties and Responsibilities:

• Obtain the assembly kits from the stock room personnel
• Verify the physical contents of the assembly kit to the Pick List paperwork provided with the Shop Order
• Advise the stock room personnel of any discrepancies found and requests corrections to the issued materials
• Assemble items in accordance with company drawings and assembly instructions, following the steps (in order) as outlined in the provided Shop Order routing. The Manufacturing Technician indicates completion of each routing step by initialing before starting the subsequent assembly step
• Request in-process inspection where required...

If you are open to light physical labor (frames and lenses for glasses) and working together with a fantastic team to help people everywhere buy more affordable glasses. Apply today!

Shift Hours Monday - Thursday 7:30am- 5:30pm, $17/hour to start

Work in a Brand New, Clean and Climate Controlled facility with a chance to move up in the organization based on your effort. Work for a company with an important mission to get affordable glasses to the masses.

Opportunity includes

• Brand New and Clean and Climate Controlled facility
• We pay your Health Insurance Premium
• Daily Free lunch
• Free snacks
• 401k + company match
• Generous PTO
• Training and Development

We are currently interviewing those looking to learn and grow in the optical field and to join our team at our site in Obetz, Ohio. The ideal candidate will be eager to learn, open to...

Assembly Supervisor

HIROTEC Manufacturing America, located in Fayetteville, Tennessee, is part of the HIROTEC Group, headquartered in Hiroshima, Japan. HIROTEC Group delivers body-in-white closures, exhaust systems, flexible closure tooling, and stamping dies to automotive customers around the world. With a US headquarters in Auburn Hills, MI, HIROTEC Group operates 33 facilities in eight countries.

Currently, we are seeking an Assembly Supervisor to become a part of the HIROTEC team.

Essential Duties and Responsibilities:

• Responsible for and supports production staff in achieving company goals of Safety, Quality, Delivery, and Cost communicating expectations, planning, monitoring, and evaluating job results.
• Monitor equipment for proper functionality/verify poka yokes are working correctly. Report poka yokes not working correctly/bypass and unsafe/defected operations immediately.
...

Job Title: Chrome Plating Associate

Location: Sterling Heights (14.5 Mile / Mound)

Shifts:

• 1st (Mon - Fri, Sat/Sun 4am/6am - 2pm)
• 2nd (Mon - Fri, Sat/Sun 2pm - 10pm/12am)
• Weekends and OT are mandatory when scheduled

Job Summary:

We are a tier one supplier located in the heart of Sterling Heights. Collectively as a team, we chrome plate fully assembled bumpers for GM, FCA, and Ford. We are seeking knowledge hungry production workers with a go getter / team player attitude. To be successful, you will need to be able to bend, stand, twist, and lift as well as have a keen eye for detail. The rest can be taught!

Job Description:

• Chrome Plating: You will be loading and unloading bumpers on the chrome plating conveyor belt. This department will have you taking a fully assembled bumper out of a...

Supply Chain Management Consulting, LLC is a leading consulting firm in the Aerospace & Defense industry, specializing in supply chain optimization. We are currently seeking a skilled Microelectronics Assembler to join our team. As a Microelectronics Assembler, you will be responsible for assembling and testing microelectronic components and products according to specifications.

Responsibilities

• Perform a variety of microchip and wire assembly operations under a microscope.
• Perform manual die bonding, wire bonding, ribbon bonding, or other clean room operations. Knowledge of automatic wire bonding, automatic die bonding machines, or any automatic electronic assembly equipment is a plus++.
• This position requires steady hands for handling ultra-miniature parts which may only be visible through a microscope. The applicant must have good eyesight and manual dexterity.
• Using small hand tools such as tweezers and pin probes...

Supply Chain Management Consulting, LLC is a leading consulting firm in the Aviation & Aerospace industry, specializing in supply chain optimization. We are currently seeking a skilled Electronic Assembler to join our team. As an Electronic Assembler, you will be responsible for assembling and testing electronic components and products according to specifications.

Responsibilities

• Read and interpret assembly instructions, blueprints, and schematics
• Assemble electronic components and subassemblies according to specifications
• Use hand tools and soldering equipment to perform soldering and wiring tasks
• Perform inspections and functional tests to ensure product quality and conformance to standards
• Identify and troubleshoot assembly issues or defects
• Maintain a clean and organized work area
• Follow safety guidelines and maintain a safe working environment
• Collaborate with team members and...

*Hourly Pay: $16.80/hr - $20.00/hr*

AMAX is in need of filling two Rack and Stack Assembler positions.

Essential Functions:

• Installing rails, switches, equipment and inserting servers into racked solution
• Verification of status lights on, servers, devices, and network devices (switches, modems, servers or routers)
• Verification of power connections on servers and network devices
• Installation/Verification of cables, cable connections, and network devices
• Applying labels on cables and cabling racks per CCD
• Prepares work to be accomplished by studying assembly instructions (MPI), blueprint specifications, and parts lists; verify and gathering parts, subassemblies, tools, and materials
• Unpack chassis from the box and get ready for the Production
• Assembles components by examining connections for correct fit; fastening parts and subassemblies
• Scan components' serial numbers into the...

Job Title: Cell Assembly Technician - Day Shift

Job Type: Non-Exempt, Full-Time

Location: Fremont, CA. Onsite.

Company Description

Amprius develops, designs, and manufactures high-performance lithium-ion cells for advanced applications. Amprius invented and perfected a 100% silicon anode which enables the highest energy density cell commercially available in the industry.

Summary
Amprius has an immediate opening for a Cell Assembly Technician! In this role, you will be responsible for assembling Amprius Technologies’ proprietary silicon anode Li-Ion cells using various equipment and hand tools. The ideal candidate will have experience in cell assembly and a strong attention to detail. The candidate must be reliable and able to work well in a team and have experience with mechanical assembly. This role will report to the...

Job Title:  Cell Assembly Technician (Day Shift)

Job Type: Non-Exempt, Full-Time

Location: Fremont, CA. Onsite.

Company Description

Amprius develops, designs, and manufactures very high-performance lithium-ion cells for advanced applications. Amprius invented and perfected a 100% silicon anode which enables the highest energy density cell commercially available in the industry.

Summary

Amprius has an immediate opening for a Cell Assembly Technician! The Cell Assembly Technician uses various equipment and hand tools to produce Amprius Technologies’ proprietary silicon anode Li-Ion cells. The candidate must be reliable, able to work well in a team, and have experience with mechanical assembly. This role will report to the Battery Assembly Supervisor. This is a 6-months TEMP role.

Job...