Jobs in Iowa

Summary The Refrigeration Technician will provide industrial maintenance support while performing a variety of tasks including, but not limited to corrective maintenance (CM), preventative maintenance (PM), and predictive maintenance (PDM).  Installs and repairs industrial and commercial refrigerating systems, but not limited to plant utilities, ammonia refrigeration, HVAC, steam, water, gas, compressed air, and building systems.

Essential Duties and Responsibilities include the following. Other duties may be assigned.

Operate and perform maintenance on boiler condensate return systems boiler feed water systems sack economizers, and chemical injection systems for boilers and cooling towers.  

Understand ammonia characteristics, properties, dangers, and know proper handling procedures. 

Starts system, observes operation, reads gauges and instruments, and adjusts mechanisms such as valves, controls, and...

Responsible for the general maintenance; hydraulic and electronic systems while ensuring maximum production quality and quantity while promoting safety throughout the maintenance department.

Essential Duties and Responsibilities include the following. Other duties may be assigned.

Assist with reducing downtime and increase efficiencies when completing repairs and maintenance equipment. 

Works toward accomplishing objectives regarding production, technology, and resource needs.

Complete all assigned installs, test, maintenance, and repair of facilities and equipment.

Assist with strategies to reduce mechanical downtime and keep product flow and production.

Participate in all maintenance training to keep up with the most updated version of operating procedures.

Assist when possible with the operation of plant equipment and systems to minimize unplanned downtime and anticipate problems to identify opportunities for...

Summary

Maintenance Electrician must comply with all safety rules and GMP while performing all job duties. Installs, repairs, troubleshoots, and operate electrical systems, apparatus, and electrical and electronic components of industrial machinery and equipment by performing the following duties.

Essential Duties and Responsibilities include the following. Other duties may be assigned.

Installs power supply wiring and conduit for newly installed machines and equipment such as robots, conveyors, and programmable controllers.

Connects power supply wires to machines and equipment, and connects cables and wires between machines and equipment.

Diagnoses malfunctioning apparatus such as transformers, motors, and lighting fixtures and replaces damaged or broken wires and cables.

Tests malfunctioning machinery and discusses malfunction with other maintenance workers, such as Maintenance Machine Repairer and...

Summary

The EHS Specialist will work on site to develop and enhance a culture of consistent safe behavior according to the Company’s policies and procedures.

Essential Duties and Responsibilities include the following. Other duties may be assigned. 

Will lead the behavior-based safety observation program. Ensure that all injuries have appropriate corrective actions, are identified and completed in order to prevent incident recurrence. Assist with and train supervisors on proper accident investigations and accident reports. Identifies potential causes for accidents and recommends changes in policies and procedures to prevent accidents and illness.

Reviews documentation with each occurrence to validate and audit as an internal control.

Help aid in development of a near miss reporting system.

Conducts weekly safety meetings in each department and serves as an advisor to onsite supervisors in...

Need someone with strong communication skills. Someone who is self-motivated. Targeting someone with a software engineering background, rather than mechanical engineering oriented who is interested in doing field software test work to verify product and system level performance. Able to retain information and apply it. Someone with knowledge of John Deere equipment and precision products

What You'll Do

• Provide Software Engineering Test and Verification of John Deere's line of Global Navigation Satellite System (GNSS) receivers
• Work with Software and System Engineering to define test setup and standardize test plans
• Participate in periodic bug review meetings to ensure software development and product team understand software issues clearly.
• Provide daily assistance and guidance to team on scheduled tasks/bugs, which may involve working with non-technical team members to understand customer faced issues.
...

123 Exteriors is on the lookout for dedicated, goal-driven, entrepreneurial individuals to join our sales team. We are actively expanding our sales team to meet the growing demand from our customers. We are searching for exceptional individuals who want to seize a unique opportunity and take their income to new heights. If you have a resilient nature, persuasive skills, tenacity, a go-getter attitude, and most importantly, confidence, we want to hear from you!

As a Sales Representative, you will have endless earning potential. Hail and wind storms cause billions of dollars in damages every year. With our crews, managers, operations, and supplement teams, we empower you to not only achieve financial success but also make a positive impact by helping those in need.

Company Overview

123 Exteriors is a part of the Elite Family of Brands, established in 2006. We are a community-oriented company with a nationwide reach. This ensures consistent payment, reliable job...

DSI is a sales enablement company that has an immediate career opportunity for a motivated individual to fill a key role as Entry-Level Sales Representative for DIRECTV Lodging & Institutions. This is an amazing opportunity if you are new to the workforce and looking to build a career with a great company that prefers to promote from within.

As an Entry-Level Sales Representative, you will identify sales opportunities within senior living communities and lodging facilities within your assigned account. In addition, you will partner with dealers to win new business and support marketing initiatives.

This is an in-office position that will report to our Urbandale, Iowa office.
Monday – Friday 8:30 am – 5 pm

About DSI

DSI is a family-owned company that has been in business since 1984. We provide enhanced value that delivers results for our clients and partners; through sales management, marketing assistance,...

DSI is a sales enablement company that has an immediate career opportunity for a motivated individual to fill one of our key roles as a Business Development Specialist for the AT&T SMB program. In this role, the Business Development Specialist is responsible for handling mobility and fiber to small businesses.

As a Business Development Specialist, you will play a pivotal role in our growth strategy within the AT&T SMB program. Your primary responsibility will be to engage with potential strategic partners, effectively assessing their fitness and readiness to engage in our program. Meticulously qualifying leads through a series of targeted interactions, you will ensure that only the most promising opportunities are handed off to our dedicated team for further development.

This position will report to our office in Urbandale, IA.

About DSI

DSI is a family-owned company that has been in business since 1984. We provide...

Day-to-day
- Create and edit manufacturing routings
- Generate programs for laser operations
- Review manufactured part prints
- Check production inventory and forecasted inventories
- Transfer stock between departments
- Communicate with other departments about material transfers
- Communicate with supply management on purchased parts and stock availability
- Update daily and weekly reports using Excell and other MS office tools
- Occasionally draw and model simple parts for shop
- Troubleshoot part requests from engineers
- Troubleshoot laser programs and manufacturing routings

Systems Used
- SAP
- CREO
- AutoCAD
- MS Office (Excel, Word, PowerPoint)

Requirements

- 2-year degree in Pre-Engineering, Manufacturing/Engineering Tech, Computer-Aided Drafting or related (or equivalent experience)
- Experience in a manufacturing setting
- MS Office...

As an Offshift Maintenance Supervisor for the John Deere Foundry located in Waterloo, IA, you will provide supervision to, and schedule work for the skilled trades employees maintaining foundry equipment. In addition, you will:

• Give safety, environmental, and ergonomic leadership to direct reports to ensure that they work safely and all work that they complete complies with safety, environmental, and ergonomic standards and regulations

• Ensure all environmental, safety, and preventive maintenance work is completed accurately and on time.
• Recognize equipment repairs and improvements and work with maintenance engineering to scope, plan, and prioritize these projects.
• Ensure that assigned personnel have appropriate training, work instruction and tools to successfully do their job.
• Lead safety through regular safety communications, driving engagement in the CI Safety and...

As a Weld Manufacturing Engineer for Tractor Cab Assembly Operations (TCAO) located in Waterloo, Iowa you will
provide support of welding and fabrication operations utilizing your technical experiences.

In addition, you will:

• Drive continuous improvements working with a cross functional wage and salary team
• Address quality issues utilizing data, root cause analysis, and mistake proofing methods
• Establishing sequence of events, part routings, proper operating method sheets, labor standards, layouts,
  tool concepts, part and equipment costs, and quality plans
• Participate in team studies related to capacity, productivity, and efficiency
• Support the launch of new product lines, model year changes & running changes

Requirements

What Skills You Need

• 1 – 3 years Fanuc Robotics Programming Knowledge & Experience
• 1 – 3 years PLC...

• Performs/monitors standard processes or operations that are highly stable and/or relatively consistent in how to fix. TYPICAL EXAMPLES: imaging computers, replacing printer toner, disposing of outdated assets, and resolving trouble tickets from ServiceNow queues.
• Documents recording and/or distributing information. Has some breadth, depth and/or frequency of interaction with external contacts. Typical examples include updating assets in Asset Center, following KB articles for problem resolution, and following unit specific processes.
• Responsible for effective e-mail communications and ability to create and maintain basic
  documents/records: TYPICAL EXAMPLES: --contact lists --process logs --problem incidence reports --customer information updates – exterior ship orders --inventory, maintenance or other service records--handling standard facilities administration requests
• Responsible for recognizing problems with the processes/operations...

Your Responsibilities
As an Aftertreatment Performance Analysis Engineer - Contingent for John Deere Power Systems located in Waterloo, IA, you will…

Develop and validate 1D chemical kinetic models for relevant aftertreatment components such as Diesel Oxidation Catalyst (DOC), Diesel Particulate Filter (DPF), Selective Catalytic Reduction (SCR), Ammonia Oxidation Catalyst (AOC), DOC catalyzed DPF (DOCF), etc.

Initiate, plan, coordinate and perform analysis projects using 1D aftertreatment models and other supporting models to investigate current and future emissions reduction techniques

Maintain an understanding of aftertreatment devices and emission reduction strategies for diesel and alternative fuel engines

Provide well thought out documentation on analysis process, results, and setup procedures, ensure consistent and high-quality models to support deployment

Requirements

What Skills You Need
...

Container Planning and Design Analyst

Duties:

• Provide ongoing support for other container related tasks and Container Planning and Design Specialists.
• Analyzing and working container parms and repack queue – all parms and repack that impact containers.
• Investigating and resolving all Qnotes that are assigned against the container department.
• Investigate current OFP packaging issues or requests; identify root cause and permanent corrective action/packaging solution as required with consideration for safety/ergo, part quality, cost, shipping and material flow/handling efficiency, and line side presentation.
• Lead and drive continuous improvement projects related to returnable containers or part packaging plans.
• Lead and drive continuous improvement projects related to various Container Planning & Design processes.
• Lead and drive specific cost reduction projects.
• Various audits...

As a Safety Analyst for John Deere Waterloo Foundry located in Waterloo, Iowa, you will assist the Safety Lead in planning, designing, implementing, and evaluating health and safety management programs and processes to promote a safe work environment and ensure compliance with all appropriate laws, regulations, and standards at a complex Foundry facility.  In addition, you will:

• Analyze appropriate health and safety metrics to identify trends and opportunities for continuous improvement
• Conduct periodic inspections, risk assessment, incident investigations, and ergonomic evaluations
• Assist in corrective action development and ensure follow-up
• Develop and deliver safety education and training tracking 90% for employees
• Cority Data Input (Corrective Actions, 300, 300A, BLS Survey)
• Powered Industrial Trucks Audits (Daily Inspections Checks)
• Near Miss Database Management
...

As a Weld Manufacturing Engineer for Tractor Cab Assembly Operations (TCAO) located in Waterloo, Iowa

you will provide support of welding and fabrication operations utilizing your technical experiences.
In addition, you will:

• Drive continuous improvements working with a cross functional wage and salary team
• Address quality issues utilizing data, root cause analysis, and mistake proofing methods
• Establishing sequence of events, part routings, proper operating method sheets, labor standards, layouts,
  tool concepts, part and equipment costs, and quality plans
• Participate in team studies related to capacity, productivity, and efficiency
• Support the launch of new product lines, model year changes & running changes
  
  

Requirements

• 1 – 3 years Fanuc Robotics Programming Knowledge & Experience
• 1 – 3 years PLC Logic Understanding and...

Full time, 2nd shift position. Hours 2pm-10:30pm with occasional OT as needed.

MAJOR DUTIES: Description of the major duties performed in this job.

• Provides engineering design for the infrastructure for the facility, grounds and production equipment and processes through both internal and external resources. Projects are more complex and require integration and coordination of various engineering disciplines.
• Provides project management of projects related to the facility infrastructure, production machines, equipment and processes that support the manufacturing and/or distribution operation.
• Projects are more complex and may integrate several areas of engineering and require limited management of outside design professionals and contractors.
• Provides troubleshooting of the facility infrastructure and production equipment to support production, manufacturing, distribution and maintenance operations.
• Responds to critical...

1st shift supervisor (5:30 AM - 3:00 PM)

These positions will be in direct support of our Skid Steer Assembly manufacturing operations to lead a team of production employees focused on safety, quality, and delivery. We have a need for one 1st shift supervisor (5:30 AM - 3:00 PM). Ability to work with a supervisor team and/or independently to lead a team of highly skilled production employees to execute on daily safety, quality, and delivery goals as it pertains to manufacturing Skid Steer welding operations.

Requirements

• Ability to collaborate with cross functional employees to solve problems and deliver on daily execution needs
• Ability to communicate effectively with production employees, cross functional team members, and leadership.
• Drive engagement in the continuous improvement process with a cross functional wage and salary team.
• Experience using SAP and production related computer...

We are a full-service commercial vehicle repair shop and we're looking for an experienced Diesel Mechanic. We work on all types of Commercial Trucks and Trailers. We have heavy exposure to Detroit, Cummins, Hino, and Isuzu. If it has a DOT sticker on it we will work on it!

• Pay is based on experience, up to $34 hour
• Day shift available
• Full Benefits and PTO
• Full time

Schedule

• 10 hour shifts & 8 hour shift
• Monday – Friday

Requirements

• Minimum 1 year experience
• Tractor and Trailer experience with diagnostics and trailer work exposure
• MN DOT certification is preferred but not required

Benefits

• Health & Dental insurance
• Paid time off
• Positive work environment

Join our team today! Apply now to connect with right away. We're looking forward to...

POSITION OVERVIEW:

The Store Manager is responsible for overseeing the general operations of the store, creating, and implementing a store sales strategy to maximize sales, and providing a wonderful & cheerful customer experience to all customers. In addition, he/she will manage the store team and help align associates around our corporate values/mission. In addition to operational responsibilities such as opening/closing, inventory management, loss prevention, payroll & scheduling, and visual merchandising, the Store Manager will be responsible for achieving store objectives, maintaining KPIs, developing the team, and ensuring adherence to all company policies & procedures. The Store Manager will be expected to model effective sales techniques and manage the customer experience on the salesfloor.

Responsibilities:

• Achieve and exceed productivity and sales plan expectations
• Improve profitability by...

U.S. Vision is looking for an Independent Part Time Optometrist to run their own office located in or adjacent to our JCPENNEY Optical Department in our Davenport Iowa location! Twelve to fifteen hours a week of coverage are needed. Fill-in opportunities are also available at this location.

We have a simple 3 page agreement with no competitive restrictions and a very reasonable rent structure. This opportunity does not require any investment. You set your own fees and the patient records belong to you. We offer a variety of flexible arrangements and schedules to meet your needs. Our staff acts as your ancillary staff, in states where permitted, and assists with greeting your patients, completing patient histories, answering phones, scheduling appointments and supporting you in any way they can.

U.S. Vision is one of the largest eyewear companies in the United States. We have been...

C & B Equipment, a progressive family-owned company that has grown over 30 years to include John Deere ag, material handling and powersports locations has an opening for a part-time Cleaning position at its John Deere dealership located in Spencer, Iowa. This individual would work a flexible schedule of approximately 6-10 hours per week with strong attention to detail. Previous cleaning experience preferred.  

Essential Duties:

• Clean offices
• Sweep, vacuum, mop and scrub floors. Strip and wax floors as necessary
• Clean, sanitize and stock supplies in all bathrooms and break rooms
• Empty all trash receptacles and transport trash to dumpster
• Clean and polish furniture and fixtures
• Clean windows, glass partitions, and mirrors
• Dust furniture, walls, machines, and equipment
• Performs cleaning and routine maintenance and other duties as directed by supervisor
...

💻 Fully Remote - from a North America State

Our number one focus is to help brands build genuine human connections with their consumers. We partner with our clients to find business solutions through human interactions driven by data and insights. We use insights to form strategy, then execute across all areas of social, including community management, listening, content, reporting, and crisis management.

We are Social Element - a place where everyone has a voice. Diverse in our make-up and inclusive in our thinking; this has been who we are from the get-go. We strive to create a place where everyone is celebrated and has the opportunity to shine. We feel ready and excited to bring our whole selves to work. #genuinehumanconnections

We are currently looking for a Social Content Director in North America who is a proven, creative, social media expert who is ready for the opportunity to define and...

DSI Systems Inc., an authorized AT&T Representative partner, has an immediate career opportunity for a Bilingual Spanish Call Center Agent – AT&T Small Business Orders Support.

As a Bilingual Spanish Call Center Agent supporting AT&T Small Business Orders, you will play a crucial role in ensuring a seamless experience for our small business customers and sales partners. You will be responsible for handling incoming calls, addressing customer concerns, and assisting with AT&T product and service orders.

This is an in-office position, with minimal required travel.

About DSI

DSI is a family-owned company that has been in business since 1984. We provide enhanced value that delivers results for our clients and partners, through sales management, marketing assistance, hardware logistic solutions, immersive training, engineering expertise, and proprietary software solutions.

We believe that relationships are...

The Engineer will focus on optimizing our interconnected components of a manufacturing system.
We seek a professional who will develop and apply engineering standards and procedures, providing advice on issues within the engineering field. In this role, you will help coordinate plant location, personnel workflow and ergonomics, materials logistics, production process sequence and equipment layouts.

Key Accountabilities

Help manufacturing plant and facilities engineers with facility planning and design.
Help conduct cost/inventory/production control and human factors studies to develop and implement plans for facility modifications and revise operating methods.
Establish methods to maximize use of production facilities and personnel.
Independently solve moderately complex issues with minimal supervision, while escalating more complex issues to appropriate staff.

Requirements

*** Food industry...