Quality Inspector

POSITION SUMMARY 

Verifies product conformance to design requirements. Provides objective evidence of results. Performs auditing, surveillance, and monitoring. Identify and documents discrepancies. Segregates and controls non-conforming items. Performs preliminary review and disposition of non-conformance. Conducts product review with customer during product or process verification. Identifies repetitive or significant non-conformances and initiates requests for corrective action.

Under limited supervision, inspects incoming parts and products, outgoing orders verify that certification is correct, checks parts for processing, checks special orders, daily use of micrometers, gauge controls, calipers, indicators, etc. Provides mentorship throughout the Inspection team. This responsibility will be discharged under the authority delegated by the Director of Quality

ESSENTIAL FUNCTIONS
...

JOB SUMMARY:

Responsible for ensuring the quality standards established by the company are met by analyzing parts and determining if the part meets established standards by performing the following functions.

• Understands on line packer QC checks and performs off line QC checks.
• Knows all the parts and understands the function of material: cap, substrate, and regrind.
• Performs each check on each QC sheet.
• Uses tape measure, square, calipers, and micrometer and must own the tools needed to do their job.
• Calibrates Hunterlab and Gloss meter
• Complete reports accurately and completely and finds paperwork needed to determine the appropriate formula to use.
• Solves minor equipment problems and performs minor repair work on equipment such as batteries on gloss meter or microscope
• Changes thermocouple wire on oil can testers.
• Explains to operators and packers why a...

The Inspector performs receiving, in-process, and/or final inspection on electronic systems, electromechanical assemblies, or mechanical assemblies and subassemblies.  Accepts or rejects product based on established inspection procedures.  Determines or assists in determining methods, sequences and procedures necessary for inspection.  The position may require communication between production, shipping/receiving, and other quality inspection areas.

Duties and Responsibilities:

• Perform all tests, inspections and measurements required by pre-defined instruction and guidance from area lead.
• Conduct inspection of incoming raw materials, first article parts, in-process materials, and finished goods with support and guidance from the area lead and/or supervisor.
• Inspect both work in progress and completed tasks for compliance in accordance with the Purchase Order Instructions, Design Drawings...

JOB SUMMARY

The Mechanical Quality Inspector is responsible for the First Article Inspection and ensures product conformity to establish requirements by evaluating product to customer and Engineering drawings, specifications, and other related documents. Coordinates the receiving, in-process and final product inspections, and documents results in various reports and logs in the Quality System Network.

DUTIES AND RESPONSIBILITIES

• Fundamental mechanical and mathematical inspection knowledge.
• Familiar with the use of all inspection hand gauging including but not limited to, micrometers, thread gauges, dial indicators, calipers, height gauges, etc.
• Ensure proper operation of measurement equipment by following operating instructions.
• Robust knowledge of GD&T, blueprint, and spec interpretation.
• Work and adhere to quality management systems and requirements (i.e., training,...

***********PLEASE READ BELOW*****************

The Immediate Pay, Quality Inspector position offers individuals the opportunity to receive payment for their work on the same day they perform their duties. This position is designed to provide a quick and fair compensation system for workers who are seeking immediate income.

Upon starting the job, workers will be paid for their first day of work (ONLY) at the end of that day. However, it is important to note that if a worker does not show up for their second day of work without prior notice or valid reason, they will be terminated from the position. This is a W2 position. You will not be considered if you do not perform video screen.

Overall Purpose of the Quality Inspector

Provide Quality services and support for all missions assigned to a manufacturing or warehouse site while ensuring a healthy and safe work environment.

Reports to Site Supervisor/Site...

JOB SUMMARY

Operator Keyence hand-held CMM to inspect products for conformance to blueprint specifications. Develops, applies, and maintains the company and customer quality standards for industrial processes, materials, and products by performing the following job duties.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Primary responsibility will be to operate a Keyence hand-held CMM to measure parts for receiving inspection, first article inspection, and final inspection. Identifies defects or discrepancies and reports them to the Quality Manager as needed.
• Also required to measure parts with various instruments and gauges.
• Understands and observes all necessary safety procedures: safety glasses, shoes, ear protection, machine interlocks, lifting guidelines, etc. as designated in specific work area assigned.
• Work with precision and accuracy of production equipment and testing,...

About Us:

Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery.

Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle...

Verify that all processing and quality requirements as specified on the customer drawings and production traveler have been met.

Essential Duties & Responsibilities:

• Perform pre-inspection documents and other collection documentation (prolog, packing slip, part marking and part labeling).
• Complete inspection documents and other collection documentation.
• Perform all visual and mechanical inspections of incoming, solderability test and production parts using a microscope, optical comparators, ring magnifiers and/or calipers.

Other Duties & Responsibilities:

• Maintain safe work area and comply with safety procedures and equipment operating rules keeping work area in a clean and orderly condition.
• Participate in any variety of meetings and work groups to integrate activities, communicate issues, obtain approvals, resolve problems and maintain specified level of...

About Us:

We're not just another manufacturing facility; we're dedicated to ensuring the highest standards of product quality. Our platform connects meticulous individuals like you to a variety of opportunities in the dynamic world of quality control. Whether you're an experienced quality control inspector or someone eager to contribute to maintaining product excellence, we provide a spectrum of opportunities right in your area. Join our quality control team where your attention to detail is not just appreciated but crucial!

Requirements

Your Role:

We are seeking detail-oriented and proactive Quality Control Inspectors to join our team for on-demand roles in various manufacturing settings. As a Quality Control Inspector, you're not just checking products; you're an essential part of ensuring the excellence and consistency of products through precise and thorough inspections. Here’s what you’ll...

RESPONSIBILITIES:

• Ensures that all water system construction and/or improvement projects are completed in accordance with the approved Plans, Specifications, Special Provisions, Standard Drawings and Approved Material Guidelines List.
• Ensures that all water system construction and/or improvement projects assigned to you are properly inspected.
• Performs Field Checks on all preliminary plans to ensure completeness of plan and identify potential conflicts and/or provide input to more cost-effectively complete construction.
• Manages Contract Inspectors to ensure that all construction is properly inspected.
• Compiles As-built drawings, and prepares Closing packages.
• Prepares Daily Inspection Reports including Chlorination reports, observes waterline pressure tests, collects and files materials tickets and compaction tests, tracks contractors time (labor, equipment, and materials) and measures and records depth and...

Job Summary:

The Mechanical Quality Inspector is responsible for the First Article Inspection and ensures product conformity to establish requirements by evaluating product to customer and Engineering drawings, specifications, and other related documents. Coordinates the receiving, in-process and final product inspections, and documents results in various reports and logs in the Quality System Network.

Duties/Responsibilities:

·       Fundamental mechanical and mathematical inspection knowledge.

·       Familiar with the use of all inspection hand gauging including but not limited to, micrometers, thread gauges, dial indicators, calipers, height gauges, etc.

·       Ensure proper operation of measurement equipment by following operating instructions.

·      ...

This company is constructing state-of-the-art aerospace component manufacturing facilities using software-defined precision technology. They are in search of skilled machinists who are enthusiastic about advancing their craft and engineers who are motivated to enhance the manufacturing process.

They are looking for a Machining Quality Specialist with 2+ years of experience to work on all facets of the inspection workflow from machining to paperwork generation and shipping.

Requirements

Core responsibilities

• Collaborate closely with a CMM Programmer to follow a job's entire lifecycle
• Acquire skills in working alongside CAM Programming and Machining, particularly during prove-out and prototyping projects.

• Take full ownership of Quality operations throughout a job's lifecycle, excluding CMM programming.
• Partner with CMM Programmers to oversee all initial articles, addressing common...

The Quality Control Inspector is responsible for the performance of aircraft and aircraft accessories inspections to ensure compliance with Federal safety regulations and adheres and promotes daily values.

Responsibilities

• Assists the Inspection department in overseeing aircraft quality issues.
• Inspect airworthiness release.
• Reviews aircraft records.
• Performs inspections of any addition to our 135-operating certificate.
• Determines when NDT may be required.
• Performs audits of aircraft, and vendors, and monitors off-site work for following GMM standards.
• May be required to train technicians in company policies and GMM procedures.
• Perform additional tasks & responsibilities as required.

Requirements

Education

• Associate degree or equivalent from two-year College or technical school and/or 48 months of related...

Available Shift:

1st Shift: 6:00 a.m. - 3:30 p.m.

2nd Shift: 3:30 pm. - 1:00 a.m.

There is opportunity for growth; top performers who are interested in developing their skills are eligible for advanced positions at the six-month mark. Eligibility is based on attendance and performance.

Job Summary:

We are an automotive supplier seeking self-motivated, reliable, hard-working, and detail-oriented entry level quality inspectors for the end of line inspection.

Duties and Responsibilities: