CNC Operator / CNC Machinist

JOB SUMMARY

Prince Industries is currently seeking CNC machinists in our lathe, swiss, and milling departments in Carol Stream, IL. This position operates CNC machinery, secondary equipment, and grinders to create metallic and nonmetallic workpieces.

Machines we operate:

• Mazak, Mori Seiki - Lathe/Turning
• Eurotech - Turning/Swiss Technique/Bar Feeder
• Haas - Vertical Milling
• Makino, Mazak - Horizontal Milling

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Perform machine operation and startup, restarting the machine, adjusts tooling to maintain proper sizes, replaces broken or worn tooling.
• Verify conformance of work piece to specifications, using measuring instruments such as micrometers, calipers, and go-no-go gauges.
• Secures all tooling and instruments required; Positions and secures work piece in holding device, machine table, chuck, centers, or...

Title: Machine Tech

Department: Machine Shop

Reports to: Machine Shop Supervisor

Primary Responsibilities:

• Operation of Okuma CNC Machining Centers to very close tolerances (.0005” 8-16 RMS surface finishes).
• Machines raw materials into finished machined parts per drawing and manufacturing instructions which are predetermined.
• Maintain Production Rates on given jobs on the machines.
• CNC operators are to suggest efficiency increases when possible.
• Responsible for housekeeping and machine preventative maintenance.
  

• Set-up CNC machines with a basic knowledge of correct tool selection for a given job. Loading tools and parts correctly. Establish correct tool geometry by touching off part or tool eye.
• Verifies program and...

Talent One Recruitment is seeking a CNC Operator / CNC Machinist for a manufacturing company in Orange County- Tustin, Santa Ana area.

Job Type: Full-Time (Direct-Hire)

Schedule: 2nd Shift (5:00 PM - 1:30 AM)

Pay Range: $20/hr. - $30/hr. D.O.E

Responsibilities:

Will Set up and operate 5-axis CNC Mill independently

Adhere to engineering plans, specifically tailored for CNC machining/ operating.

Inspect machined parts to maintain quality standards, employing CNC-specific inspection methodologies.

Perform Manual Data Input (MDIs) when necessary for optimization.

Collaborate with Engineering, Programming, and Quality Inspection teams for CNC process refinement

Fulfil any additional duties as related to CNC operations

Maintain clear and effective communication with the opposite shift through logbooks, verbal updates, and shift handovers, ensuring seamless CNC production...

JOB SUMMARY

This CNC Machinist will Set Up and Operate machine tools to machine metallic and nonmetallic workpieces for the Aerospace Industry by performing the following duties below.

Machines we operate:

Swiss: Tsugami BS20 and SS32

Lathe:

• Twin Spindle/Single Turret: Eurotech
• Single Spindle/Single Turret: Mori Seki, Haas
• Twin Spindle/Twin Turret: Eurotech and Mori Seki

Horizontal Milling: Mori Seki, Mori DMG and Enshu

Vertical Milling: Haas and Mori Seki

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Knowledge of G&M Code is required for set up of the machines.
• Required to set up and operate CNC machines using written instructions and set up sheets.
• Responsible for setting up fixture and proving out programs for production to run.
• Read and interpret process plans, blueprints, and part sketches...

Job Title: Skilled CNC Machinist / Horizontal Mill Operator

Location:

• 10 Mile and Hoover, Warren Mi

Pay:

• $24/hr+ (pending experience and interview)

Shift:

• Flex Schedule: 1st (Start between 6a-9a, End between 2:30p-5:30p)
• Monday - Friday
• Over-time and Weekends as needed
• 30-minute unpaid lunch

Daily Duties / Job Description: Our shop produces turn key products and chucks for over 100 automotive and aerospace clients in the USA as well as overseas. You will produce machined parts by programming, setting up, and operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. Experience with Doosan NHP6300 Horizontal Mill and/or Fanuc 31i-B Control (Doosan Conversational Programming) is desirable.

• Plans machining operations by studying work orders, engineering plans, materials,...

Job Title: Skilled CNC Machinist / Horizontal Mill Operator

Location:

• 10 Mile and Hoover, Warren Mi

Pay:

• $24/hr+ (pending experience and interview)

Shift:

• Flex Schedule: 1st (Start between 6a-9a, End between 2:30p-5:30p)
• Monday - Friday
• Over-time and Weekends as needed
• 30-minute unpaid lunch

Daily Duties / Job Description: Our shop produces turn key products and chucks for over 100 automotive and aerospace clients in the USA as well as overseas. You will produce machined parts by programming, setting up, and operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. Experience with Doosan NHP6300 Horizontal Mill and/or Fanuc 31i-B Control (Doosan Conversational Programming) is desirable.

• Plans machining operations by studying work orders, engineering plans, materials,...